Pet Folding Swimming Pool

{Inflatable products in daily use when the following precautions}
1, do not approach sharp things, such as: prickly plants or sharp stones, blades.
2, in the use of inflatable products under the bedding cloth, to prevent debris punctured.
3. Do not use it as a life-saving float.
4. Stay away from flames or hot objects.
5, when the temperature is higher, do not expand and close the valve inflatable products placed in the car or tent.
6, do not touch sunscreen or alkaline drugs.
7. Keep out of reach of pets.
8, the gas nozzle part is hard, should be avoided at rest.
9, do not be exposed to the sun for a long time, UV will make the surface of the material slowly damaged.

{How to repair inflatable products}
A. Repairing the eye of the needle:
If your inflatable product accidentally pricked one or more small needle eyes by a needle or a wooden thorn, it is the easiest repair:
1. Cover the gas nozzle after the product is deflated to reduce the gas flow in the bed;
2. Take out the glue in the repair kit and put a drop of glue on the eye of the needle.
3, if the needle eye is larger, then take a toothpick, with the tip of the toothpick jiao point glue, it will be painted into the damaged needle eye, and then glue the needle eye mouth coated with;
4. After the repair is complete, wait four hours before inflating.

B. Repair the cut or scalding:
If your product is accidentally cut by a knife or burned to break a big hole, please do not panic, according to the following order, can be repaired:
1. Cover the gas nozzle after the product is deflated to reduce the gas flow in the bed;
2. Find the patch material in the repair bag and cut a piece of it, which should be enough to cover the broken seam;
3. Apply the glue to the damaged place, press the patch, and glue the edge seam of the patch;
4, apply pressure to ensure that there is no gap on the rubber surface, and press it firmly with smooth and heavy objects;
5. Wait for eight hours before inflating and repair is completed.

C. Suede repair:
1. Carefully clean the repair area;
2, after drying, take out the patch cut, cover the damaged surface, allow a little more around;
3. Apply a layer of glue on the patch and damaged surface, and glue the edge seam of the patch to ensure a thorough sealing;
4. Press it firmly with smooth, heavy objects;
5. Press with heavy objects, press to 24 hours later and then inflate, and repair is completed.

D. Other matters:
1, remember not to inflate too full (especially in summer), do not carry out too strenuous exercise on the product, otherwise the pull belt in the product will be overloaded and broken, resulting in product bulge and can not be repaired, can only be scrapped.
2, repair glue is chemical, do not contact eyes or swallow.